Digi MIL-4711H User's Guide

Doc. Number: 75425 Rev. A MIL-4711H Manageable Hub User’s Guide This guide includes the following information:“Description of Hardware” on page 2“D

Install GuideModel: MIL-4711H 2 Micro Modules used with the MIL-4711H: • MIL-4310M• MIL-4320M• MIL-4330M• MIL-4340M• MIL-4350M• MIL-4360M• MIL-4370M

Install GuideModel: MIL-4711H 3 Figure 3.MIL-4711 (Rear View w/ the MIL-4310 Module) Description of the LEDs On the front panel of the MIL-4711H, the

Install GuideModel: MIL-4711H 4 The DB-9 Serial Port Figure 4.RS-232C Serial Port Pin Assignments Note: N/C=No Connect Installation Procedure Follow

Install GuideModel: MIL-4711H 5 Assigning an IP Address Every device on a TCP/IP network is identified by two addresses:• The address is a 6-byte addr

Install GuideModel: MIL-4711H 6 7. If prompted with a message like Warning: Entering monitor will lock out other Ethernet access and force reset , t

Install GuideModel: MIL-4711H 7 6. Verify that the RARP daemon is running: ps-ax | grep RARP (for BSD UNIX) orps-ef | grep RARP (for System V UNIX) O

Install GuideModel: MIL-4711H 8 2. Use a text editor to open the /etc/hosts file and add the following line: 192.185.2.3 alpha 3. Use the following me

Doc. Number: 75425 Rev. A Legal Regulatory Approvals • FCC Class A• UL 1950• CSA 22 No. 950• EN60950• CE – EN55022 Class B– EN50082-1 Canadian EMI