Digi TransPort WR11 User Manual Page 3

  • Download
  • Add to my manuals
  • Print
  • Page
    / 8
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 2
Wired Interfaces (Continued)
Ethernet
Ports
4 1
Standard/Physical Layer
IEEE 802.3; 10/100 Base-T
Data Rate/Mode/Interface
10/100 Mbit/s; Full or Half duplex; Auto MDI/MDIX
Connector
Option of 4-pin D-coded M12 female or 8-pin
A-coded M12 female
RJ-45
I/O
Digital I/O
Input 4 - 28 VDC / Output: 28 VDC 50 mA max
Extended temperature variants: Input 4 - 28 VDC /
Output: 28 VDC 50 mA max
Connector
4-pin A-coded M12 Male (2 pins are used for I/O;
the other 2 pins are used for DC Power)
4-pin Molex (1 pin for input; 1 pin for I/O; the
other 2 pins are used for DC power)
Extended temperature variants: 4-pin Molex
(2 pins are used for I/O; the other 2 pins are used
for DC power)
USB
Ports
N/A
1
Standard
USB 2.0 USB 1.0
Signaling
Full- or low-speed
Connector
Type A
DSL*
Technology
N/A
VDSL2, ADSL2+, ADSL2, ADSL
N/A
Standard
Option of Annex A/M or B
Connector
RJ-11
Protocol
N/A
RFC 2364 PPPoA, RFC 2516 PPPoE, RFC 2684
Bridged Ethernet, RFC 1483 Routed IP (all either
LLC or VC-Mux);
PPP and ATM PVC support
N/A
Other
Expansion Cards
N/A
Optional expansion cards available for GPS, fleet, telemetry
(digital/analog I/O), ISDN/PSTN, serial and DialServ.
See page 5 for more information.
Software/Management
Remote Management
Device Cloud (cloud based); Digi Remote Manager™ (user installed/managed); SNMP v1/v2c/v3 (user installed/managed)
Local Management
Web Interface (HTTP/HTTPS); CLI (Telnet, SSH, SMS, Serial port)
Management/
Troubleshooting Tools
FTP, SFTP, SCP, Protocol Analyzer with PCAP for Wireshark, Event Logging with Syslog and SMTP, NTP/SNTP
Programming Tools/
Environments
Python, DIA, Digi ESP™
Software Packages
(See page 7 for details)
Enterprise Option of Standard or Enterprise
Memory
128 MB NAND Flash/64 MB DDR2 SDRAM 64 MB RAM, 32 MB NOR Flash
Power
Input
9 – 36 VDC 8-48 VDC
Consumption
15W max, 8.5W typical 6W max, 4W typical
Connector
4-pin A-coded M12 male
(2 pins are used for power; the other 2 pins are
used for I/O)
Locking barrel and 4-pin terminal block
Locking barrel or 4-pin terminal block (extended
temperature models only)
DC Power Cord*
4-pin A-coded M12 female to bare wire Locking barrel to bare wire or 4-pin connector to bare wire
DC Power Supply*
(P/N: 76000917) 100W, 24 VDC output, 67-143 VDC
input, EN50155 compliant;
(P/N: 76000918) 400W, 14.2 VDC output, 40–100
VDC input, EN50155 and S-5702 compliant
100-240 VAC 50/60 Hz; Option of standard temperature or extended temperature
Battery Backup
None
Specifications
* Optional hardware
** Transfer rates are theoretical and network operator dependent
*** Reduced cellular performance may occur outside of -20º C to +60º C. Standard temperature power supplies may reduce temperature range.
Digi TransPort® WR44/WR44 R Digi TransPort® WR41Digi TransPort® WR44 RR
Page view 2
1 2 3 4 5 6 7 8

Comments to this Manuals

No comments