Digi TransPort WR41 User Manual download pdf (Page 5)

Expansion Cards

Connector

Available for Digi TransPort WR41/WR44/WR44 R

Sync/Async Serial Port (S1)

1 x DB-25

X.21/RS-422/RS-232 synchronous/

asynchronous serial port

Async Serial Ports (A3)

3 x RJ-45

3x asynchronous RS-232 serial ports

PSTN (P1)

1 x RJ-45

PSTN interface that can be used to dial out and

receive calls. A PPP session is created over

which IP trafﬁc can be sent and received.

DialServ (P3)

1 x RJ-11 (FXS)

Dial tone simulator to emulate local telco.

ISDN (I1)

1 x RJ-45

ISDN Basic Rate Interface (BRI) which can be conﬁgured either

as a TE (terminal endpoint) or as NT-1 (network termination).

The option also includes an additional asynchronous serial port via a second RJ-45 port.

ISDN-U/PSTN (I3)

1 x RJ-11, 1 x RJ-45

ISDN-U interface suitable for the USA plus PSTN interface. Can be conﬁgured for

Bell-103 modulation in leased line mode as well as a normal PSTN interface.

Telemetry 1 (T1)

1 x 14-pin terminal block

4 x Opto-isolated digital output ports and 1 x Opto-isolated digital input port.

It also provides a relay I/O port, voltage monitoring port, and internal temperature monitoring.

Fully programmable via Python for embedded Digi TransPort applications.

Telemetry 2 (T2)

1 x 14-pin terminal block

4 x Analog and 4 x Digital I/O ports fully programmable via

Python for embedded Digi TransPort applications.

GPS (G1)

1x SMA

Fully-integrated GPS tracking.

See main speciﬁcations area for details.

Fleet (F1)

1 x 4-pin, 1 x 15-pin, 1 x SMA

Flexible transportation/ﬂeet focused applications requiring CAN bus, J1708, GPS, Non-isolated

digital I/O, Ignition Sense, 3-Axis accelerometer, and power control of Digi TransPort interfaces.

Fully programmable via Python for embedded Digi TransPort applications.

Speciﬁcation

1 2 3 4 5 6

Comments to this Manuals

No comments

Digi TransPort WR41 User Manual Page 5

Comments to this Manuals

Related products and manuals for Routers Digi TransPort WR41