Digi PortServer TS 8 Setup Guide download pdf (Page 49)

Configuring IP Routing

9-7

Configuring Proxy ARP

This section describes how to configure PortServer TS 8/16 for Proxy ARP.

Related Information

See the set forwarding command in the Digi One/PortServer TS Command Reference.

Starting Point

This procedure assumes that you have signed on as root and have or will configure modems, modem

scripts, devices, and filters for routes that use serial lines.

Procedure

1. Configure the links over which packets will be routed using a set user command. This command

must specify (on the ipaddr field) a specific IP address for the remote system using the Proxy

ARP service.

2. Configure PortServer TS 8/16 for Proxy ARP by supplying a set forwarding command that spec-

ifies the following:

• state=passive

• proxyarp=on

Example

In this example, PortServer TS 8/16 provides Proxy ARP services to a remote host.

set user name=link1...ipaddr=187.155.24.11

set forwarding state=passive proxyarp=on

Digi Device

187.155.24.0

PPP

187.155.24.11

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 105 106

No comments

Digi PortServer TS 8 Setup Guide Page 49