Digi PortServer TS 8 Setup Guide download pdf (Page 88)

17-4 Terminal Server Configuration Using RealPort

Terminal Server Configuration Using RealPort

In this example, the PortServer TS 8/16 is simply providing ports for the LAN-based host using

RealPort. The configuration is exceedingly simple because port attributes are configured on the host

itself.

Related Information

For more information on configuring:

• The Ethernet interface, see "Configuring the IP Address" on page 2-1

• RealPort, see "Configuring Ports for RealPort" on page 3-1

Illustration

Configuration

set config ip=192.250.150.11 submask=255.255.255.0 (1)

set ports range=2-4 dev=rp (2)

Configuration Notes

1. The set config command configures the internet address and mask for PortServer TS 8/16 Ether-

net interface.

2. The set ports command configures ports 2, 3, and 4 for Realport. This command specifies

dev=rp, which is an appropriate device type for RealPort.

Printer

Terminal

Modem

192.250.150.11

1 2 ... 83 84 85 86 87 88 89 90 91 92 93 ... 105 106

No comments

Digi PortServer TS 8 Setup Guide Page 88