Configuration through the web interface
100
SIM card selection and settings
The Digi device may be equipped with one or two Subscriber Identity Module (SIM) cards. A SIM
card contains the account information associated with a particular mobile service provider.
All of the settings available on the Mobile Configuration page are stored individually for each SIM
card.
SIM card settings include:
SIM: Select the SIM card identified by the slot number.
Set as Primary: Click to make this the preferred SIM to use to establish mobile
connections.
IMSI: The International Mobile Subscriber Identity (IMSI) number that uniquely
identifies the SIM card.
Phone Number: The phone number associated with the mobile account, if available.
Note that the IMSI and phone number may not be available until the SIM is used to
attempt a connection.
Status: The configuration status of the SIM. It may be one of these values:
– Not configured: A mobile service provider has not been configured. Select a provider
from the list under Mobile Service Provider Settings.
– Disabled: The SIM will not be used to establish a mobile connection. To enable, click
Apply under Mobile Settings.
– Not installed: The SIM card is not plugged into the Digi device server.
– Primary: This is the preferred SIM to use to establish mobile connections.
– Secondary: If a connection cannot be established with the primary SIM, this SIM will
be used instead.
Comments to this Manuals