Digi ConnectPort X4 User's Guide download pdf (Page 51)

Configuration through the web interface

Change the IP address from the web interface, as needed

Normally, IP addresses are assigned to Digi devices either through DHCP or the Digi Device Setup

Wizard.

This procedure assumes that the Digi device already has an IP address and you simply want to

change it.

1 Open a web browser and enter the Digi device’s current IP address in the URL address bar.

2 If security is enabled for the Digi device, a login prompt is displayed. Enter the user name

and password for the device. The default username is root and the default password is dbps.

If these defaults do not work, contact the system administrator who set up the device.

3 Click Network to access the Network Configuration page.

4 On the IP Settings page, select Use the following IP address.

5 Enter an IP address (and other network settings), then click Apply to save the configuration.

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 270 271

No comments

Digi ConnectPort X4 User's Guide Page 51