Digi ConnectPort X4 User's Guide download pdf (Page 52)

Configuration through the web interface

Network configuration settings

The Network configuration pages include:

 Ethernet IP settings: For viewing IP address settings and changing as needed. See

page 55.

 WiFi IP settings: For setting the IP address used for wireless LAN communication. See

page 56.

 WiFi LAN settings: For setting basic options for wireless LAN devices such as

network name and network connection options. See page 56.

 WiFi Security settings: For setting authentication and encryption options for wireless

LAN devices. See page 57.

 WiFi 802.1x Authentication settings: Detailed authentication settings for IEEE 802.1x

authentication for wireless LAN devices. See page 59.

 DHCP Server settings: For configuring a DHCP server to allow other devices or hosts

on this network to be assigned dynamic IP addresses. See page 60.

 Network Services settings: Enable and disables access to various network services,

such as ADDP, RealPort and Encrypted RealPort, Telnet, HTTP/HTTPS, and other

services. See page 64.

 Dynamic DNS Update settings: For configuring a Dynamic DNS (DDNS) service that

allows a user whose IP address is dynamically assigned to be located by a host or

domain name. See page 67.

 IP Filtering settings: For configuring the Digi Cellular Family device to only accept

connections from specific and known IP addresses or networks. See page 70.

 IP Forwarding settings: For configuring the Digi Cellular Family device to forward

certain connections to other devices. This is also known as Network Address

Translation (NAT) or Port Forwarding. See page 71.

 IP Network Failover settings: provides a dynamic method for selecting and

configuring the default gateway for the Digi device using a set of rules and link tests to

determine whether a particular network interface can be used to communicate with a

specified destination. See page 74.

 Socket Tunnel settings: For configuring a socket tunnel, used to connect two network

devices: one on the Digi Cellular Family device’s local network and the other on the

remote network. See page 78.

 Virtual Private Network (VPN) settings: For configuring Virtual Private Networks,

which are used to securely connect two private networks together so that devices may

connect from one network to the other network using secure channels. See page 79.

 IP Pass-through settings: Configures a Digi Cellular Family device to pass its mobile

IP address directly through and to the Ethernet device (router or PC) to which it is

connected through the Ethernet port. The Digi Cellular Family device becomes

transparent (similar to the behavior of a cable or DSL modem) to provide a bridge from

the mobile network directly to the end device attached to the Digi Cellular Family

device. See page 88.

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 270 271

No comments

Digi ConnectPort X4 User's Guide Page 52