Digi ConnectPort X4 User's Guide download pdf (Page 194)

Configuration through Simple Network Management Protocol (SNMP)

194

Configuration through Simple Network Management Protocol (SNMP)

Configuring Digi devices through Simple Network Management protocol uses a subset of standard

MIBs for network and serial configuration, plus several Digi enterprise MIBs for device

identification and alarm handling. These MIBs are listed and described on page 159, and must be

loaded into a network management station (NMS). The standard and Digi Enterprise MIBs allow

for very basic network and serial configuration. For more detailed configuration settings, use the

command-line interface or web interface instead.

Some elements of SNMP configuration can only be configured from the web interface or

command line, such as the setting to send alarms as SNMP traps. In the web interface, this setting

is located at Configuration > Alarms > alarm > Alarm Destinations > Send SNMP trap to

following destination when alarm occurs. See "Alarms" on page 151. In the command-line

interface, this setting is configured by the set alarm option type=snmptrap. See the set alarm

command description in the Connect Family Command Reference.

For information on SNMP as a monitoring interface, see page 229.

Batch capabilities for configuring multiple devices

For configuring many Digi devices at a time, batch configuration capabilities for uploading

configuration files are available through the Digi Connect Programmer. For details and command

descriptions, see the Digi Connect Family Customization and Integration Guide.

1 2 ... 189 190 191 192 193 194 195 196 197 198 199 ... 270 271

No comments

Digi ConnectPort X4 User's Guide Page 194