Administration from the command-line interface
251
Administration from the command-line interface
Administrative tasks for Digi devices can also be performed from the command line. Here are
several device-administration tasks and the commands used to perform them. See the Digi Connect
Family Command Reference for more complete command descriptions. For descriptions of these
commands, see the Digi Connect Family Command Reference.
Administrative task Command
Backup/restore a configuration from a
TFTP server on the network
backup
Update firmware boot
Telnet to the Digi device's command line interface
using a telnet application or hyperterm.
If security is enabled for the Digi device, a login
prompt is displayed. The default username is root
and the default password is dbps. If these defaults
do not work, contact the system administrator who
set up the device.
Issue the command:
#> boot load=tftp-server-ip:filename
where tftp-server-ip is the IP address of the TFTP
server that contains the firmware, and filename is
the name of the file to upload.
Reset configuration to factory defaults revert
or
boot action=factory
Display system information and
statistics
info
Reboot the device boot
Enable/disable network services set service
Comments to this Manuals